In depth
Machinery Regulation: a guide to the new regulation and cybersecurity
What changes with Regulation (EU) 2023/1230 on machinery: dates, scope, high-risk machinery, manufacturer obligations and, above all, the new cybersecurity requirements for software, data and control systems and the link with the CRA, NIS 2, the AI Act and technical standards, with references to the articles.
In short for businesses
- Who it concerns
- You build, import or sell in the EU machinery, partly completed machinery, interchangeable equipment or safety components. If you only use machinery you have no direct obligations, but if you substantially modify a machine, even with a software update, you become its manufacturer.
- What to do
- On top of the traditional safety requirements, the manufacturer must protect the machine against corruption, including by cyber means, and make sure its control systems withstand attacks (Annex III, points 1.1.9 and 1.2.1). It then carries out the conformity assessment, with a notified body for some high-risk machinery, and affixes the CE marking.
- When
- The regulation applies from 20 January 2027 and replaces the Machinery Directive; machinery placed on the market under the directive before that date may still be sold.
A simplified summary: details and exceptions are below. Terms with a dotted underline link to the glossary.
Regulation (EU) 2023/1230 on machinery replaces Machinery Directive 2006/42/EC, which has been in force for almost twenty years, and Directive 73/361/EEC on wire-ropes, chains and hooks. It sets the essential health and safety requirements that machinery, related products and partly completed machinery must meet to be sold or put into service in the Union (Art. 1). It applies for the most part from 20 January 2027 (Art. 54).
It is a regulation, no longer a directive: it applies directly in all Member States without national transposition laws, avoiding the differences in application seen under the directive. It follows the European product safety model: essential requirements laid down in law (Annex III), harmonised standards that give a presumption of conformity (Art. 20), notified bodies for the most dangerous machinery, the EU declaration of conformity and the CE marking.
The most important change compared with the directive is digital. Today’s machines are connected, are updated through software and increasingly use artificial intelligence: for the first time, the law on machinery also considers the cyberattacks that can make a machine dangerous.
The link with cybersecurity
In practice: from 20 January 2027 a machine with software or connections must be protected against accidental or deliberate tampering that could make it dangerous, and keep a record of interventions on its software.
The Machinery Regulation is not a cybersecurity law: its purpose remains the safety of people. But it recognises that an attack or corrupted software can cause as much harm as a mechanical fault, and it requires manufacturers to take proportionate measures, limited to what is needed to protect the safety of the machine; other EU laws that deal specifically with cybersecurity, such as the CRA, continue to apply (recital 25).
Protection against corruption (Annex III, section 1.1.9). This is the new cybersecurity requirement. The machine must be designed so that:
- connecting another device, directly or remotely, does not lead to a hazardous situation;
- hardware components transmitting signals or data relevant for access to safety-critical software are protected against accidental or intentional corruption, and the machine collects evidence of interventions, legitimate or not, in those components;
- safety-critical software and data are identified as such and protected against accidental or intentional corruption;
- the machine can show at all times, in an easily accessible form, the installed software it needs to operate safely;
- the machine collects evidence of any intervention in the software or any modification of the software or its configuration.
Control systems that stay safe under attack (Annex III, section 1.2.1). Control systems must withstand not only operating stresses and external influences, but also reasonably foreseeable malicious attempts from third parties leading to a hazardous situation (point (a)). The regulation also requires:
- a tracing log of interventions and of the versions of safety software uploaded after the machine is placed on the market, kept for five years and used only to demonstrate conformity at the reasoned request of an authority (point (f));
- that for wireless control a failure or loss of communication does not lead to a hazardous situation;
- that parameters do not change in an uncontrolled way and that stopping is never prevented.
Software is a safety component. A safety component can be physical or digital, including software (Art. 3, point 3), and “software ensuring safety functions” placed on the market separately is on the indicative list of safety components (Annex II, point 18). A company that sells only safety software for machinery is therefore a manufacturer under the regulation.
Updates can make a machine “new”. A substantial modification can also be made by digital means, for example a software update not foreseen by the manufacturer that creates a new hazard or increases an existing risk (Art. 3, point 16). Whoever makes it becomes the manufacturer and must carry out the conformity assessment again; this does not apply to a non-professional user who modifies their own machine for their own use (Art. 18).
Source code on request. National authorities can ask, with a reasoned request, for the source code or programming logic of safety software, where needed to check compliance with the requirements (Art. 10(3) and Annex IV, Part A).
Cybersecurity certification and presumption of conformity. Machinery certified, or covered by a statement of conformity, under a European cybersecurity certification scheme adopted under Regulation (EU) 2019/881 (Cybersecurity Act) and published in the Official Journal is presumed to comply with sections 1.1.9 and 1.2.1, to the extent the certificate covers them (Art. 20(9) and recital 51). The first scheme adopted is EUCC for ICT products.
Key dates
| Date | What happens |
|---|---|
| 29 June 2023 | Publication in the Official Journal of the EU |
| 19 July 2023 | Entry into force; from the same date the transitional rules and the safeguard procedures apply to machinery under the directive (Arts. 52 and 54) |
| 20 January 2024 | The rules on notified bodies apply (Arts. 26-42) |
| 29 May 2026 | The emergency procedures added by Regulation (EU) 2024/2748 apply (Chapter IVa) |
| 20 October 2026 | National penalties apply and must be notified to the Commission by this date (Art. 50) |
| 20 January 2027 | The regulation applies for the most part and Directive 2006/42/EC is repealed (Arts. 51 and 54) |
| 20 July 2028 | First Commission evaluation report, then every four years (Art. 53) |
| 2 August 2028 | Deadline for the requirements on high-risk AI systems added by delegated acts to apply (Art. 8) |
The dates are those set by the corrigendum published on 4 July 2023: the original text gave 14 January 2027 and similar dates in error. Machinery placed on the market under the directive before 20 January 2027 may continue to be sold, and EC type-examination certificates remain valid until they expire (Art. 52). Other deadlines are in the document record.
What it applies to
The regulation applies to machinery and to these related products: interchangeable equipment, safety components, lifting accessories, chains, ropes and webbing, and removable mechanical transmission devices. It also applies to partly completed machinery, that is, assemblies that cannot work on their own and are intended to be incorporated into another machine (Art. 2(1)). An assembly that only lacks the software intended for its specific application is also machinery (Art. 3, point 1(f)).
Excluded are, among others (Art. 2(2)): identical spare parts supplied by the original manufacturer, equipment for playgrounds and amusement parks, weapons, means of transport by air, water or rail (but not machinery mounted on them), type-approved motor vehicles and tractors (with the same exception), seagoing vessels and offshore units, machinery for military or police purposes, machinery for research used temporarily in laboratories, and some electrical and electronic products covered by the Low Voltage or Radio Equipment Directives (household appliances, audio, video and IT equipment, office machinery, electric motors). Where a more specific EU law covers the same risks, the regulation does not apply to those risks (Art. 9).
High-risk machinery and conformity assessment
In practice: machines in Annex I, Part A always need a notified body; Part B machines only if you do not apply harmonised standards covering all requirements. All other machines need only internal control.
Annex I lists the most dangerous categories of machinery, in two parts:
- Part A: a notified body is always needed (EU type-examination, full quality assurance or unit verification, Art. 25(2)). Besides mechanical transmission devices, vehicle servicing lifts and cartridge-operated tools, it includes the two new AI-related categories: safety components with self-evolving behaviour using machine learning to ensure safety functions, and machinery embedding such systems, only as regards those systems (points 5 and 6).
- Part B: the manufacturer can assess conformity itself (internal production control, module A) only if it applies harmonised standards or common specifications covering all the requirements; otherwise a notified body is needed (Art. 25(3)). There are 19 categories, including saws and other woodworking machinery, presses, underground machinery, devices for lifting persons, protective devices designed to detect persons, logic units to ensure safety functions, and ROPS and FOPS structures.
| Machinery | Conformity assessment procedure |
|---|---|
| Annex I, Part A | Always with a notified body: modules B + C, H or G (Art. 25(2)) |
| Annex I, Part B, with harmonised standards or common specifications covering all requirements | Internal control (module A) or modules B + C, H or G (Art. 25(3)) |
| Annex I, Part B, without standards covering all requirements | With a notified body: modules B + C, H or G (Art. 25(3)) |
| All other machinery | Internal production control, module A (Art. 25(4)) |
For all other machinery, internal production control is enough (Art. 25(4)). The Commission can update Annex I by delegated acts, based on the severity of the risk and on accident data that Member States send every five years (Art. 6).
Obligations of manufacturers and other operators
In practice: the manufacturer starts from a risk assessment, draws up the technical documentation and EU declaration, affixes the CE marking and keeps everything for 10 years; instructions may be digital.
The manufacturer of a machine (Art. 10):
- designs and builds it in line with the requirements of Annex III, starting from a risk assessment;
- draws up the technical documentation (Annex IV) and carries out the conformity assessment;
- draws up the EU declaration of conformity and affixes the CE marking;
- keeps the documentation and declaration for at least 10 years;
- provides the instructions for use, which can also be digital: in that case they must be downloadable and printable, stay online for at least 10 years and be given on paper free of charge if the buyer asks; non-professional users must always receive the essential safety information on paper;
- if a machine does not comply, brings it into conformity, withdraws or recalls it and, if it presents a risk, informs the authorities immediately.
The manufacturer of partly completed machinery draws up the technical documentation (Annex IV, Part B), the EU declaration of incorporation and the assembly instructions (Art. 11). Importers and distributors check that the manufacturer has met its obligations and do not sell non-compliant products (Arts. 13-17).
Machinery and artificial intelligence
The regulation already deals with machinery with self-evolving behaviour or logic designed to operate with varying levels of autonomy: their control systems must not make the machine act beyond its defined task and movement space, must record data on safety decisions for one year and must allow the machine to be corrected at all times (Annex III, section 1.2.1). Settings generated during the learning phase must not be able to create hazardous situations.
With Regulation (EU) 2026/1744 (Digital Omnibus on AI), the Machinery Regulation moves from Section A to Section B of Annex I to the AI Act: for machinery with high-risk AI, the AI Act requirements no longer apply directly but will be added to Annex III of the Machinery Regulation by Commission delegated acts, to apply by 2 August 2028 (Art. 8). Until specific standards are adopted, the harmonised standards and common specifications of the AI Act give a presumption of conformity (Art. 20(10)).
Machinery Regulation, CRA, NIS 2
Many machines are also products with digital elements under the Cyber Resilience Act, which applies from 11 December 2027. The two regulations apply together: the manufacturer must meet both the safety requirements of the Machinery Regulation and the cybersecurity requirements of the CRA (recital 53 CRA).
| Aspect | Machinery Regulation (EU) 2023/1230 | CRA (EU) 2024/2847 |
|---|---|---|
| What it protects | The health and safety of people | The cybersecurity of the product and its data |
| Cyber requirements | Protection of critical software, data and hardware against corruption and control systems resistant to attacks, only insofar as they affect safety (Annex III, sections 1.1.9 and 1.2.1) | Essential requirements on confidentiality, integrity and availability, attack surface, vulnerability handling and security updates (Annex I) |
| After sale | Log of interventions and safety software versions for five years | Vulnerability handling for the whole support period and reporting to ENISA of actively exploited vulnerabilities and severe incidents from 11 September 2026 |
| Conformity assessment | Notified body for the categories in Annex I | Notified body or certification for many important products and for critical products |
The CRA states that meeting its requirements can facilitate compliance with sections 1.1.9 and 1.2.1 of the Machinery Regulation, but the manufacturer must demonstrate it, for example through harmonised standards and a risk assessment that also covers cybersecurity risks, and must follow the conformity assessment procedures of both regulations. The Commission and the European standardisation organisations must make the standards for the two regulations consistent, and the Commission is to issue guidance for those subject to both (recital 53 CRA).
NIS 2, on the other hand, does not concern products but companies: the manufacture of machinery and equipment (NACE C28) is one of the sectors in Annex II, so machinery manufacturers above the size thresholds are important entities with cybersecurity risk-management and incident-reporting obligations (Annex II, point 5(d), NIS 2).
Harmonised standards
Harmonised standards are voluntary, but whoever applies them is presumed to comply with the requirements they cover (Art. 20(1)). With standardisation request M/605 of 20 January 2025 the Commission asked CEN and CENELEC to prepare new harmonised standards for the regulation, including on new requirements such as cybersecurity and AI, and to revise those existing under the directive. If standards are missing, the Commission can adopt common specifications by implementing acts (Art. 20(3)).
For cybersecurity, the main reference standards are:
- EN ISO 12100, the basic standard on risk assessment for machinery;
- EN ISO 13849 and EN IEC 62061, on the functional safety of control systems;
- IEC TS 63074, which links the functional safety of machinery to the cybersecurity of control systems;
- the IEC 62443 series on the cybersecurity of industrial automation and control systems;
- prEN 50742 Safety of machinery – Protection against corruption, being prepared at CENELEC specifically for section 1.1.9.
Market surveillance and penalties
Market surveillance follows Regulation (EU) 2019/1020: national authorities check the machinery on sale and can order corrective action, withdrawals and recalls (Chapter VI). Penalties are set by Member States: they must be effective, proportionate and dissuasive and may include criminal penalties for serious infringements; the regulation sets no amounts (Art. 50).
Subsequent acts and guidance
| Act | What it adds |
|---|---|
| Corrigendum of 4 July 2023 (opens in a new tab) | Corrects the dates of application: 20 January 2027 instead of 14 January, and the others accordingly |
| Implementing Regulation (EU) 2024/1922 (opens in a new tab) (12 July 2024) | The template Member States use to collect data on accidents and harm caused by machinery (Art. 6(10)) |
| Commission guidance C/2024/6142 (opens in a new tab) (14 October 2024) | How to fill in the template for accident data |
| Regulation (EU) 2024/2748 (opens in a new tab) (9 October 2024) | Emergency conformity assessment procedures during an internal market emergency, from 29 May 2026 |
| Standardisation request M/605 (opens in a new tab) (20 January 2025) | Asks CEN and CENELEC for harmonised standards for the regulation |
| Regulation (EU) 2026/1744 (opens in a new tab) (8 July 2026) | Digital Omnibus on AI: the AI Act requirements for machinery with high-risk AI will be added to Annex III by delegated acts, by 2 August 2028 |
An application guide to the new regulation has not yet been published: the Commission provides the guide to Directive 2006/42/EC (edition 2.3, April 2024) on its machinery page (opens in a new tab).
Official sources
This page summarises the text of the act for information only and is not legal advice. Only the text published in the Official Journal of the European Union is authentic.